30W,AC/DC桌面型电源适配器,单路输出 TP04 系列
产品简介
30W ###1 ###5VDC
9VDC
12VDC
15VDC
18VDC
24VDC ###90-264 VAC ###80% ###84×47×32mm ###0~+40℃ ###液晶显示器
笔记本电脑
网络设备
产品详细信息
TP04-XXXYYYW series
Features:
·Universal AC input/ Full range
‧2 pole AC inlet
‧Protections:Short circuit/Over load/Over voltage
‧Fully enclosed plastic
‧Class II power(without earth pin)
‧Pass LPS
‧LED indicator for power on
‧No load power consumption <0.3w
‧ErP step2 compliant (level v)
‧NR Can compliant‧MEPS compliant
‧Meet ELSA2007(Energy Independence and Security Act)
‧2 years warranty
Specification:
OUTPUT
Model NO
TP04-050400
TP04-090300
TP04-120250
TP04-150200
TP04-180166
TP04-240125
DC Voltage Note.2
5V
9V
12V
15V
18V
24V
Rated current
4.0A
3.0A
2.5A
2.0A
1.66A
1.25A
Current Range
0~4.0A
0~ 3.0A
0~2.5A
0~2.0A
0~1.66A
0~1.25A
Rated Power(max)
20W
27W
30W
30W
30W
30W
Ripple&Noise(max) Note.3
100mVp-p
100mVp-p
120mVp-p
150mVp-p
180mVp-p
240mVp-p
Voltage tolerance Note.4
±5.0%
±5.0%
±5.0%
±5.0%
±5.0%
±5.0%
line regulation Note.5
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
load regulation
±5.0%
±5.0%
±5.0%
±5.0%
±5.0%
±5.0%
setup,rise time Note.7
1000ms,50ms/230VAC 1000ms,50ms/115VAC at full load
hold up time(Typ.)
50ms/230VAC 15ms/115VAC at full load
INPUT
VOLTAGE RANGE
90~264VAC 127~370VDC
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
75%
78%
82%
83%
83%
84%
AC CURRENT(Typ.)
1.0A/115VAC 0.5A/230VAC
INRUSH CURRENT(max.)
50A/230VAC
LEAKAGE CURRENT(max.)
0.25mA/240VAC
PROTECTION
OVER LOAD
120~300% rated output power
Protection type:Hiccup mode,recovers automatically after fault condition is removed
OVER VOLTAGE
5~7.5V
9.45~13.5V
12.6~18V
15.75~22.5V
18.9~27 V
25.2~36V
Protection type:Shut down o/p voltage,re-power on to recover
ENVIRONMENT
WORKING TEMP.
-0~`+40℃(Refer to"Derating Curve")
WORKING HUMIDITY
20%~90% RH non-condensing
STORAGE TEMP.,HUMIDITY
-20~+75℃,10~95% RH
TEMP.COEFFICIENT
±0.03%/℃ (0~40℃)
VIBRATION
10~500Hz, 2G10min./1cycle,period for 60 min.each along X,Y,Z axes
SAFETY & EMC
(Note.6)
SAFETY STANDARDS
UL60950-1,TUV EN60950-1,BSMI CNS14336,CCC GB4943,J60950-1 approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
ISOLATION RESISTANCE
I/P-O/P, 25℃/70%RH: 100M Ohms/500VDC
EMC EMISSION
Compliance to EN55022 class B,EN61000-3-2,3,FCCPART15/CISPR22 classB,CNS13438 classB,GB9254,GB17625.1
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11,light industry level,criteria
OTHERS
MTBF
50K hrs min.MIL-HDBK-217F(25℃)
DIMENSION
84*47*32mm(L*W*H)
PACKING
0.28Kg; 40pcs/12.02Kg/1.05CUFT
CONNECTOR
PLUG
Standard type P1J:2.1ψ* 5.5ψ*11mm,tuning fork type,other type available by customer requested.
CABLE
Other type available by customer requested
NOTE
1,All parameters are specified at 230VAC input ,rated load, 25℃ 70% HUMIDITY.
2,DC voltage: The output voltage set at point measure by plug terminal & 50% load
3, Ripple& noise are measured at 20MHZ by using a 12"twisted pair terminated with a 0.1uf &47uf capacitor
4,Tolerance: includes set up tolerance, line regulation,load regulation
5,Line regulation is measured from low line to high line at rated load.
6,The power supply is considered as an independent unit,but the final equipment still need to re-confirm that the whole system complies with the EMC directives.
7, Length of set up time is measured at first cold start.Turning on/off the power supply may lead to increase of the set up time