30W,插墙式电源适配 TP04W 系列
产品简介
30W ###1 ###5-24 VDC ###90-264 VAC ###80% ###84×47×32mm ###0~+40℃ ###液晶显示器/笔记本电脑/网络设备
产品详细信息
Features:
·Universal AC input/ Full range
‧2 pole AC inlet
‧Protections:Short circuit/Over load/Over voltage
‧Fully enclosed plastic
‧Class II power(without earth pin)
‧Pass LPS
‧LED indicator for power on
‧No load power consumption <0.3w
‧ErP step2 compliant (level v)
‧NR Can compliant‧MEPS compliant
‧Meet ELSA2007(Energy Independence and Security Act)
‧2 years warranty
OUTPUT | Model NO | TP04-050400 | TP04-090300 | TP04-120250 | TP04-150200 | TP04-180166 | TP04-240125 |
DC Voltage Note.2 | 5V | 9V | 12V | 15V | 18V | 24V | |
Rated current | 4.0A | 3.0A | 2.5A | 2.0A | 1.66A | 1.25A | |
Current Range | 0~4.0A | 0~ 3.0A | 0~2.5A | 0~2.0A | 0~1.66A | 0~1.25A | |
Rated Power(max) | 20W | 27W | 30W | 30W | 30W | 30W | |
Ripple&Noise(max) Note.3 | 100mVp-p | 100mVp-p | 120mVp-p | 150mVp-p | 180mVp-p | 240mVp-p | |
Voltage tolerance Note.4 | ±5.0% | ±5.0% | ±5.0% | ±5.0% | ±5.0% | ±5.0% | |
line regulation Note.5 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
load regulation | ±5.0% | ±5.0% | ±5.0% | ±5.0% | ±5.0% | ±5.0% | |
setup,rise time Note.7 | 1000ms,50ms/230VAC 1000ms,50ms/115VAC at full load | ||||||
hold up time(Typ.) | 50ms/230VAC 15ms/115VAC at full load | ||||||
INPUT | VOLTAGE RANGE | 90~264VAC 127~370VDC | |||||
FREQUENCY RANGE | 47 ~ 63Hz | ||||||
EFFICIENCY (Typ.) | 75% | 78% | 82% | 83% | 83% | 84% | |
AC CURRENT(Typ.) | 1.0A/115VAC 0.5A/230VAC | ||||||
INRUSH CURRENT(max.) | 50A/230VAC | ||||||
LEAKAGE CURRENT(max.) | 0.25mA/240VAC | ||||||
PROTECTION | OVER LOAD | 120~300% rated output power | |||||
Protection type:Hiccup mode,recovers automatically after fault condition is removed | |||||||
OVER VOLTAGE | 5~7.5V | 9.45~13.5V | 12.6~18V | 15.75~22.5V | 18.9~27 V | 25.2~36V | |
Protection type:Shut down o/p voltage,re-power on to recover | |||||||
ENVIRONMENT | WORKING TEMP. | -0~`+40℃(Refer to"Derating Curve") | |||||
WORKING HUMIDITY | 20%~90% RH non-condensing | ||||||
STORAGE TEMP.,HUMIDITY | -20~+75℃,10~95% RH | ||||||
TEMP.COEFFICIENT | ±0.03%/℃ (0~40℃) | ||||||
VIBRATION | 10~500Hz, 2G10min./1cycle,period for 60 min.each along X,Y,Z axes | ||||||
SAFETY & EMC (Note.6) |
SAFETY STANDARDS | UL60950-1,TUV EN60950-1,BSMI CNS14336,CCC GB4943,J60950-1 approved | |||||
WITHSTAND VOLTAGE | I/P-O/P:3KVAC | ||||||
ISOLATION RESISTANCE | I/P-O/P, 25℃/70%RH: 100M Ohms/500VDC | ||||||
EMC EMISSION | Compliance to EN55022 class B,EN61000-3-2,3,FCCPART15/CISPR22 classB,CNS13438 classB,GB9254,GB17625.1 | ||||||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,light industry level,criteria | ||||||
OTHERS | MTBF | 50K hrs min.MIL-HDBK-217F(25℃) | |||||
DIMENSION | 84*47*32mm(L*W*H) | ||||||
PACKING | 0.28Kg; 40pcs/12.02Kg/1.05CUFT | ||||||
CONNECTOR | PLUG | Standard type P1J:2.1ψ* 5.5ψ*11mm,tuning fork type,other type available by customer requested. | |||||
CABLE | Other type available by customer requested | ||||||
NOTE | 1,All parameters are specified at 230VAC input ,rated load, 25℃ 70% HUMIDITY. | ||||||
2,DC voltage: The output voltage set at point measure by plug terminal & 50% load | |||||||
3, Ripple& noise are measured at 20MHZ by using a 12"twisted pair terminated with a 0.1uf &47uf capacitor | |||||||
4,Tolerance: includes set up tolerance, line regulation,load regulation | |||||||
5,Line regulation is measured from low line to high line at rated load. | |||||||
6,The power supply is considered as an independent unit,but the final equipment still need to re-confirm that the whole system complies with the EMC directives. | |||||||
7, Length of set up time is measured at first cold start.Turning on/off the power supply may lead to increase of the set up time |