| | | NXT | CM402 |
| | | H08 | H01 | CM402-A | CM402-C |
| | | Bitmap | Bitmap | Bitmap | Bitmap |
| 1 | ☻Accuracy | ±0.04mm/3σ，±0.08mm/6σ | ±0.025mm/3σ,±0.05mm/6σ | ± 0.05 mm / 3σ | ± 0.035 mm / 3σ |
| 2 | Tact time | 0.04 sec/chip( for 1 base) | 1.0 sec/QFP | 0.06 sec./chip | 0.12 sec./chip 0.42 sec/QFP |
| 3 | Applicable components | 0.6X0.3mm~ 7.5X7.5mm, H=6.5mm | 3.2X1.6mm~ 74X74mm , H=25.4mm | 0603 ~ 24 x 24mm , H=6.5mm | 0603(0201) ~ 100 x 90 mm , H=21mm |
| 4 | ☻ Min lead pitch | 0.2mm | 0.65mm | 0.4mm |
| 5 | Fiducial mark reading time | 0.5sec/1pair | 0.80sec/1pair |
| 6 | Package | W8 ~ W12 | W8 ~ W88 (tray & stick ) | W8 ~ W24 | W8 ~ W104 (tray & stick ) |
| 7 | Head exchange | less than 30 secs | less than 30 secs | 30 mins |
| 8 | CPH | 11,000(M3)/9,400(M6) 88,000(M3*8)/37,600(M6*4) | 3,500(M3)/2,900(M6) | 60,000 | 40,000 |
| | | M3 | M6 | CM402-A | CM402-C |
| | | Bitmap | Bitmap | Bitmap | Bitmap |
| 1 | PCB Size | 50x50 ~ 534x610mm | 50x50 ~ 534x610mm | 50x50 ~ 510x460mm | 50x50 ~ 510x460mm |
| 2 | PCB thickness | 0.3 ~ 6.0 mm | 0.5 ~ 4.0 mm |
| 3 | ☻Max component weight | 50g | 30g |
| 4 | Available PCB weight | 1Kg ( option = 2 Kg) | 1Kg |
| 5 | Machine size | 325x1905x1474 | 650x1905x1474(450kg) | 2350x2690x1600(3,000kg) |
| 6 | ☻Work Space | 7.8X6.4m2 (M3X16+M6X4 , 2line) | 7.05X9.0m2 (2A1C , 2line) |
| 7 | load request | 400Kg/m2 | 500 ~ 800Kg/m2 |
| 8 | Feeder gang exchange | less than 30 secs (W/O air) | more than 60 secs (with air) |
| 9 | Nozzle changer exchange | less than 10 secs | 10mins |
| 10 | Camera calibration | 2 mins *8 | 10 mins *4 | 5 mins *4 |
| 11 | Back-up pin exchange | Auto-exchange system(option) | soft back up unit | Offline-change Jig | soft back up pin |
| 12 | Model change time | 10mins below | 40mins above |
| 13 | component Zero-waste function | easy replacement | Bitmap Bitmap |
| 14 | Module change | Yes | No |
| 15 | Loading time | 3sec | 4sec | 0.9sec , L<220mm | 1.8sec , L>220mm |
| 16 | Dual lane= 0 sec (534x280mm) | Dual lane= 0 sec (510x216mm 新機能) |
| 17 | Multi-model function | Yes | No |
| 18 | Feeder capacity | 20 (160) | 45 (180) | 216 | 216 |
| 19 | Tray supplier | No | M size 10 shelves * 2set L size 20 shelves * 1set | No | Shuttle tray 20 shelves DT401 direct tray 40 shelves |
| 20 | Feeder kind | 8mm paper,8mm emboss, 12mm,16mm,24mm,32mm,44mm,56mm,72mm,88mm =>10 kinds | 8mm,12/16mm,24/32mm,44/56mm,72mm,88mm,104mm =>7 kinds |
| 21 | Nozzle bending checking | Yes | Yes |
| 22 | Nozzle height checking | Yes | No |
| 23 | Feeder center teach | No | Yes |
| 24 | Placement pressure control | No | Yes | No | Yes |
| 25 | Nozzle change function | On production/before production | Before production |
| | | | | | |