松下印刷机SP22P SP22P

点击查看大图

产品价格： < 面议

产品型号：SP22P

品牌：松下

公司名称：深圳市悦讯科技有限公司

所在地：广东深圳

浏览次数：5118 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

松下印刷机SP22P：设备来源于欧美，欧美设备因为其使用时间少、维护保养好两大特点，而使得设备能够再利用寿命更长、精度更高、稳定性更好。 服务：40名左右售后服务工程师，24小时为客户服务。备件仓库存放大量可替换零件。电子维修部可以帮助客户维修到板卡级。以我们客户的经验来看，贴片机的年维修成本普遍低于3000元（包括易损件）

产品详细信息

Equipment       Model                   SPP-V XL                   SP22P-M
General         Length (inches)          71                        55.1
                  Width (inches)            70                        63
                   Height (inches)           59                        63
                   Automation                Fully automatic           Fully automatic

Board Handling Maximum size (inches)    18x20                     10x13
                Minimum size (inches)           2x2                       2x2
                Maximum thickness (")           0.16                      0.12
                Minimum thickness (")           0.02                      0.015
                Maximum warpage (")            0.047                     0.039
                Underside component clearance (inches)   1.18      0.94
                Board held by            Edge clamp, vacuum, pin   Edge clamp
                Board support            Tooling pins, vacuum plate Tooling pins, vacuum plate, other
                Conveyor                        Standard                  Standard
                Board Movement           R to L, L to R            L to R
                Dual-lane board handling?        No                    No

Print Head      Print area (inches)            19x29                 14.17x13.7
                Maximum print stroke(")         29                    13
                Mdthod of registration           Vision                Vision
                Optical alignment?                 Yes                   Yes
                Alignment accuracy (microns) 25                   N/A
                Alignment repeatability (microns) 8                N/A
                Print Modes             Print/print, print/flood, Print/print, print/flood,
                Print pressure (pounds)   0 to 43                  0.011 to 0.055
                Snap off (print gap) (inches) -0.04 to 0.4         N/A
                Is snap-off programmable?      Yes                 No
                Cycle time (seconds)      Single lane: 16          Single lane: 9

Stencil         Frame size (inches)       39.4x33.5                21.65x25.6
                PCB stencil seperation    0 to 0.39                0.024
                Stencil cleaning           Dry, wet, vacuum        Dry, wet, vacuum
                Programmable?              Yes                     Yes
                Stencil Wiper              Standard                Standard

Squeegee        Squeegees             Metal, polyurethane, other   Metal, polyurethane
                Squeegee pressure          0 to 43                 0.011 to 0.055
                Where measured?          At squeegee head          Air cylinder
                Horizontal or central pivot?    Both               Horizontal

Vision system   Type                              On the move , look down     Fixed, on the move, look up, look down
                Field of vision (inches)              0.120                              0.2
                SMEMA fiducial standard compatible?    Yes                        Yes
                Align calibration                        Full automatic                    Semi-automatic
                Post-print inspection available?              2-D                         2-D

Program Up and down line protocol SMEMA SMEMA
Number of programs stored 200 99

松下印刷机SP22P
1、二手SMT/AI设备买卖业务

2、销售自主研发和制造的AOI设备

3、SMT/AT设备零件买卖

4、SMT/AI设备服务销售

5、部分SMT新设备代理销售