美国鸟牌M and H Series ACM Series ACM Antenna and Cable Monitor - L1, L2
产品简介
美国鸟牌ACM Series ACM Antenna and Cable Monitor - L1, L2, 美国鸟牌M and H Series。。。。。。。。。。。
产品详细信息
美国鸟牌ACM Series ACM Antenna and Cable Monitor - L1, L2, 美国鸟牌M and H Series
ACM Series
ACM Antenna and Cable Monitor - L1, L2, M and HSeries
1、 Worldwidesystems include Tetra, Cellular and PCS with digital or analogmodulation. Other applications include 3G, AMPS, Broadcast, CDMA,CDMA 2000, DCS, EDGE, Government, GPRS, GSM, iDEN, Industrial,NPSPAC, Microwave, Military, Paging, Public Safety, Rail, SMR,TDMA, Tetrapol, Trunking, UHF, Utilities, VHF, W-CDMA and WLL
2、 Modelsavailable from 136-225 MHz, 225-520 MHz, 470-960 MHz, 960-2400MHz
3、 Accuratelymonitors your antenna and cable system VSWR levels
4、 Local orRemote operation via 7005A970 PC Tool Software (Optional Accessory)-Please Contact Factory
Bird’s Antenna & Cable Monitor is thesolution for monitoring your transmission antenna systems. Serviceproviders and self maintained end user’s can rely on this monitorand alarm to keep their critical sites up and running. Designed todetect antenna and cable faults that transmitter-internal VSWRmonitors may not detect, it also provides accurate in-line powermeasurement functionality. Please view the ACM Part NumberDefinition in the "Support Tools" section for configurationinformation.
Accessories:
7005A970 | - PC InterfaceSoftware |
ACM-RACK | - 19" Rack mountshelf |
ACM-RACKU | - 19" Rack mountshelf w/Universal power supply |
SUBCON 15/M-SH | - 15 pin D-SubConnector with Cable Entry |
ProductSpecifications:
Accuracy: | ±5% of reading, ±1count at calibration frequencies |
Alarm/PowerConnector: | 15-pin Female "D"connector |
Alarms: | Alarm Set Point:1.3, 1.4, 1.5, 1.6, 1.7, 1.8 to 1 |
Altitude: | Up to 3000 metersabove sea level |
Connector: | Monitor Ports:Female N, TNC or BNC |
ContactRating: | 100 VDC @ 0.5A |
Coupling: | Monitor Ports: -63dB approx., Subject to changes in full-scale power |
Dimensions: | 4.75" (121mm) wide,(7.55" (192mm) with connectors), 4.2" (107mm) high, 1.06" (27mm)deep |
Directivity: | 30 dB, 136-960 MHz ;26 dB, 960-2400 MHz |
EMC: | European Standard EN61326-1:1997 + Addendums A1: 1998 and A2:2001 - Electrical equip.for measurement, control and laboratory use |
Environment: | Thruline® sensor fordirect insertion in 50-Ohm line |
FrequencyRange: | 136-225 MHz, 225-520MHz, 470-960 MHz, 960-2400 MHz |
Humidity: | 0 to 95% maximum(non-condensing) |
InsertionLoss: | 0.1 dB, 136-960 MHz;0.15 dB, 960-2400 MHz |
InterfacePort: | Connector: FemaleDB-9, compatible with IBM PC AT serial port |
MaximumPower: | Section Power:Dependent on frequency and connector |
MeasurementRange: | ACM: 2.5 W to 100 W;ACM500: 12.5W to 500 W |
OperatingTemp.: | 0°C to50°C |
PassiveIntermod Products: | Less than -130dBc |
PowerAccuracy: | 136-225 MHz, ± 10%;225-520 MHz, ± 8%; 470-960 MHz, ± 5%; 960-2400 MHz, ±5% |
PowerRequirements: | +11 to +26 VDC or±36 to ±72 VDC |
Protocol: | Serial RS-232, 9600baud, no parity, 8 data bits, 1 stop bit, no handshake |
RelayContact Type: | Dry, Form C, relaycontacts, common, normally open, normally closed |
Reset: | Local Mechanicalreset switch, Remote input (Reset if VDC is 0 to +0.8volts) |
RFConnector: | N or 7/16 DIN, seeACM Part Number Definition in the "Support Tools" section on thiswebpage |
Safety: | European Standard EN61010-1:2001 - Safety Requirements - Electrical equip. formeasurement, control and laboratory use - ECMRequirements |
Stimulus: | VSWR set pointexceeded, response time proportional to overload |
StorageTemperature: | -4°F to 176°F (-20°Cto 80°C) |
Visual: | Visual Alarm- RedLED will illuminate to indicate alarm |
VSWR: | 1.07, 136 to 960MHz; 1.1, 960 to 2400 MHz, N Connectors; 1.1, 960 to 2000 MHz, 7/16Connectors; 1.2, 2000 to 2400 MHz, 7/16 Connectors |
Weight: | Less than 2 lbs.(0.9 kg) |